![]() Click the icon to go to the Firmware Upgrade page.Īlternatively, you can go to Advanced > System Tools > Firmware Upgrade, and click Check for upgrade to see whether the latest firmware is released.ģ.Focus on the Online Upgrade section, and click Upgrade.Ĥ.Wait a few minutes for the upgrade and reboot to complete. Do NOT turn off the router during the firmware upgrade.Ģ.When the latest firmware is available for your router, the update icon will display in the top-right corner of the page.Backup your router configuration before firmware upgrade.Make sure you remove all attached USB devices from the router before the firmware upgrade to prevent data loss.Also, the latest firmware will be released at the TP-Link official website and you can download it from the Support page for free. We will inform you through the web management page if there’s any update firmware available for your router. TP-Link aims at providing better network experience for users. The figure below indicates the proper connection between the router and the Yahoo server (tested through Traceroute. The figure below indicates the proper connection between the router and the Yahoo server (tested through Ping. It’s recommended to keep the default value. Traceroute is used to display the route (path) your router has passed to reach the tested host, and measure transit delays of packets across an Internet Protocol network.Ģ )Enter the IP Address or Domain Name of the tested host.Ĭlick Advanced, you can modify the ping count, ping packet size or the Traceroute Max TTL.Ping is used to test the connectivity between the router and the tested host, and measure the round-trip time.You can turn on or turn off the LEDs either from the web management page or by pressing the LED button.Ģ.Go to Advanced > System Tools > System Parameters.ģ.In the LED Control section, toggle to turn on / off the LED.Ĥ.You can enable Night Mode if needed, and set a time period, and then the LEDs will be off during this period.ĭiagnostics is used to test the connectivity between the router and the host or other network devices.Ģ.Go to Advanced > System Tools > Diagnostics.ģ.Enter the information with the help of page tips:ġ )Choose Ping or Traceroute as the diagnostic tool to test the connectivity The router‘s LEDs indicate router’s activities and status. It is 12-hour time by default, and you can toggle on to change to 24-hour time.ġ.In the Set Time field, select Get automatically from the Internet.Ģ.Select your local Time Zone from the drop-down list.ģ.In the NTP Server I field, enter the IP address or domain name of your desired NTP Server.Ĥ.(Optional) In the NTP Server II field, enter the IP address or domain name of the second NTP Server.ĥ.Click Obtain to get the current Internet time and click Save.ġ.In the Set Time field, select Manually.Ģ.Set the current Date (In MM/DD/YYYY format).ģ.Set the current Time (In HH/MM/SS format).Ģ.Select the correct Start date and time when daylight saving time starts at your local time zone.ģ.Select the correct End date and time when daylight saving time ends at your local time zone. You can choose the way to obtain the system time as needed.ġ.Visit, and log in with your TP-Link ID or the password you set for the router.Ģ.Go to Advanced > System Tools > Time Settings. The system time you configure here will be used for other time-based functions like Parental Controls. System time is the time displayed while the router is running. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |